[Static] New House [WIP] - Page 3

Elirah · 2012-08-29, 21:04

Ok, than its just as I thought. Thanks for clearing up my mind.

lucky.BOY · 2012-08-29, 21:13

Well you can make tris yourself, for example to make sure there is not too much thin triangles, but exporter saves you work. You dont have to avoid tris, yo know.

I think what Rhino meant above is to either make a polygon (an 8-gon specifically) in that area, or cut it into quads and tris if you like. just dont make there a single quad, that is not welded with the rest of the mesh.

There really isnt any way you can make the floor unoptimized, unless you add verts, which you have no reason for.

And yes, you dont do your model his own UV image, you simply take a pallete with texture you want on your surface, and then UV the surface onto that pallete.

LITOralis.nMd · 2012-08-30, 03:58

I'd like to give Elirah props on learning to model and getting such a good apartment block together on his first big attempt.

I really hope you build this like the T Buildings, with the ground floor, the levels, and the roof, all individual objects, and here is why:

This apartment block is so universal, is built in so many locales around the world, I suggest the creation of several different roofs, one looking sorta Asian, one looking bleak Soviet/Warsaw Bloc, one looking like Western Europe/NATO countries, and making each variant available to future mappers on PR.

Elirah · 2012-08-30, 09:17

It's currently all separated. I just shown the levels, for the top and the ground are just a bit modified. If I'am ready with the level, I'll show you the other models too, for they are not that different.
I wanted to do them like the T-Buildings, due I like the fact you can build them as high as the mapper needs to, and thus brings some variation already.

Elirah · 2012-08-30, 14:31

So, now I finished the floor:

All interior is welded up, with the floor and so on.
But something I need last little help and advice maybe:

So, lucky.BOY told me like that. It saves some tris though, but i was curious about that, due the fact that it isnt welded. Where I can move the red faces without manipulating the green one. Is that a huge deal or is it ok, just as lucky.BOY told.
And one thing left. Where this is the midfloor it needs a complete ground or cover. I could do this with 4 quads (what you did see in one of the previous images, where you told me to do the ground for each room). Those 4 quads you actually see, when you are in the room and look top.
Hope you understand me, for my english is maybe a bit messy (not my native language).

Greetings Elirah

Rhino · 2012-08-30, 14:50

Floor looks good

I take it the ceiling is like that too ye?

The front should be welded up like this:

If it isn't there will be a tiny gap between the two faces, sometimes a very large gap.

Last bit about the ground floor and roof I don't understand what your asking, sorry.

Elirah · 2012-08-30, 15:10

Hm, ok. So everything should be welded, whether it costs more tris or not?
I did just as lucky told me, or thats at least how I understood his first picture he posted.

In the last mess I wrote, how I am be able to make the ceiling, should I make it on top of the mesh, or make it under the current mesh, where if ill stack them up, so Ill get more floors than one, ill see the ground and the ceiling.

"English I have to learn" - Yoda says.

Stealthgato · 2012-08-30, 15:22

Nice job.

Rhino · 2012-08-30, 15:32

Quote:

Originally Posted by Elirah

Hm, ok. So everything should be welded, whether it costs more tris or not?

In some cases its better not to weld, like when its going to affect smoothing on a rounded object but most of the time, especially when it comes to walls and other main parts of the structure its best to weld, even if it dose cost extra tris, the model will be better for it.

Quote:

Originally Posted by Elirah

In the last mess I wrote, how I am be able to make the ceiling, should I make it on top of the mesh, or make it under the current mesh, where if ill stack them up, so Ill get more floors than one, ill see the ground and the ceiling.

You should make the floors and ceilings of each room part of the floor statics its on. This isn't how it is on the \objects\staticobjects\pr\citybuildings\housingblo ck_ statics but they also don't have welded up floors as they should, and a bunch of other issues.

Elirah · 2012-08-30, 15:36

Many thanks Rhino.
Todays task for me is to finish the mesh, post them, and then I'll go to 3Ds Max and mess around with texturepalettes YAY.

Something different. Is the welding also needed in the col mesh?
For if it is not welded, you may save tons of tris. Just a sidequestion.

2012-08-29, 21:04	#21
Elirah Join Date: Mar 2010 Posts: 47 Germany	Re: [Static] New House [WIP] Ok, than its just as I thought. Thanks for clearing up my mind.
Elirah Join Date: Mar 2010 Posts: 47 Germany

2012-08-29, 21:13	#22
lucky.BOY Join Date: Mar 2010 Posts: 1,413 Czech Republic Location: Prague	Re: [Static] New House [WIP] Well you can make tris yourself, for example to make sure there is not too much thin triangles, but exporter saves you work. You dont have to avoid tris, yo know. I think what Rhino meant above is to either make a polygon (an 8-gon specifically) in that area, or cut it into quads and tris if you like. just dont make there a single quad, that is not welded with the rest of the mesh. There really isnt any way you can make the floor unoptimized, unless you add verts, which you have no reason for. And yes, you dont do your model his own UV image, you simply take a pallete with texture you want on your surface, and then UV the surface onto that pallete.

2012-08-30, 03:58	#23
LITOralis.nMd Retired PR Developer Join Date: Apr 2010 Posts: 5,648 United States of America	Re: [Static] New House [WIP] I'd like to give Elirah props on learning to model and getting such a good apartment block together on his first big attempt. I really hope you build this like the T Buildings, with the ground floor, the levels, and the roof, all individual objects, and here is why: This apartment block is so universal, is built in so many locales around the world, I suggest the creation of several different roofs, one looking sorta Asian, one looking bleak Soviet/Warsaw Bloc, one looking like Western Europe/NATO countries, and making each variant available to future mappers on PR.

2012-08-30, 09:17	#24
Elirah Join Date: Mar 2010 Posts: 47 Germany	Re: [Static] New House [WIP] It's currently all separated. I just shown the levels, for the top and the ground are just a bit modified. If I'am ready with the level, I'll show you the other models too, for they are not that different. I wanted to do them like the T-Buildings, due I like the fact you can build them as high as the mapper needs to, and thus brings some variation already.
Elirah Join Date: Mar 2010 Posts: 47 Germany

2012-08-30, 14:31	#25
Elirah Join Date: Mar 2010 Posts: 47 Germany	Re: [Static] New House [WIP] So, now I finished the floor: All interior is welded up, with the floor and so on. But something I need last little help and advice maybe: So, lucky.BOY told me like that. It saves some tris though, but i was curious about that, due the fact that it isnt welded. Where I can move the red faces without manipulating the green one. Is that a huge deal or is it ok, just as lucky.BOY told. And one thing left. Where this is the midfloor it needs a complete ground or cover. I could do this with 4 quads (what you did see in one of the previous images, where you told me to do the ground for each room). Those 4 quads you actually see, when you are in the room and look top. Hope you understand me, for my english is maybe a bit messy (not my native language). Greetings Elirah
Elirah Join Date: Mar 2010 Posts: 47 Germany

2012-08-30, 14:50	#26
Rhino Retired PR Developer Join Date: Dec 2005 Posts: 47,448 United Kingdom Location: Somerset - UK Blog Entries: 45	Re: [Static] New House [WIP] Floor looks good I take it the ceiling is like that too ye? The front should be welded up like this: If it isn't there will be a tiny gap between the two faces, sometimes a very large gap. Last bit about the ground floor and roof I don't understand what your asking, sorry.

2012-08-30, 15:10	#27
Elirah Join Date: Mar 2010 Posts: 47 Germany	Re: [Static] New House [WIP] Hm, ok. So everything should be welded, whether it costs more tris or not? I did just as lucky told me, or thats at least how I understood his first picture he posted. In the last mess I wrote, how I am be able to make the ceiling, should I make it on top of the mesh, or make it under the current mesh, where if ill stack them up, so Ill get more floors than one, ill see the ground and the ceiling. "English I have to learn" - Yoda says.
Elirah Join Date: Mar 2010 Posts: 47 Germany

2012-08-30, 15:22	#28
Stealthgato Join Date: Oct 2010 Posts: 2,628 Portugal Location: Lisboa	Re: [Static] New House [WIP] Nice job.

2012-08-30, 15:36	#30
Elirah Join Date: Mar 2010 Posts: 47 Germany	Re: [Static] New House [WIP] Many thanks Rhino. Todays task for me is to finish the mesh, post them, and then I'll go to 3Ds Max and mess around with texturepalettes YAY. Something different. Is the welding also needed in the col mesh? For if it is not welded, you may save tons of tris. Just a sidequestion.
Elirah Join Date: Mar 2010 Posts: 47 Germany