[Vehicle] KTO Rosomak [WIP](PL) - Page 8

ddeo · 2013-08-14, 18:28

Hi. I've slightly reworked the model. I've tried to use the same texture, but tower texture will need to be updated (UVW has been sized up).

Feedback appreciated mostly about tower!
Here is the p3d link: p3d.in - KTO Rosomak
UVW: https://dl.dropbox.com/s/1f1lks83z0u6bj8/Rosomak.png

lucky.BOY · 2013-08-14, 18:56

Looking good, only thing I noticed is that top hatches have too few sides (unless they are meant to be octagonal

), but this being an apc you wont really be getting into it from up top, so it doesnt really matter. Though if you are not too hard pressed for LOD0 tris count, i think you could smooth them up for the odd guy who makes his way up the top, right?

EDIT: pro tip, if you replace the "www" with a "dl" in a dropbox link, it will work like a direct URL that you can embed etc, bypassing the inconvenient dropbox stuff around it.

ddeo · 2013-08-14, 19:03

Thanks lucky, you're right about hatches I will fix it. If you will spot anything else let me know. Thanks again!

edit: http://p3d.in/V02zI fixed hatches. UVW is updated too, but I'm not posting new link since it is only about more circulate hatches on UVW.

ivecorps · 2013-08-18, 17:02

very good model

ddeo · 2014-10-11, 11:32

Reality: http://sc-cdn.scaleengine.net/i/da18...66ec01de99.png
Project Reality: http://sc-cdn.scaleengine.net/i/73a6...bd2cb879b6.png
Model is made by Kane from ArmaCoopCorps, I've slightly edited it. Anybody willing to texture it?

edit: p3d view: http://p3d.in/vayoE
uv: https://www.dropbox.com/s/l0fl72fi8g...erior.png?dl=0

CaptMiller · 2016-05-03, 18:28

Very nice !

2013-08-14, 18:28	#71
ddeo Retired PR Developer Join Date: Apr 2012 Posts: 785 Poland	Re: [Vehicle] KTO Rosomak Hi. I've slightly reworked the model. I've tried to use the same texture, but tower texture will need to be updated (UVW has been sized up). Feedback appreciated mostly about tower! Here is the p3d link: p3d.in - KTO Rosomak UVW: https://dl.dropbox.com/s/1f1lks83z0u6bj8/Rosomak.png

	Last edited by [R-DEV]ddeo; 2013-08-15 at 07:22..

2013-08-14, 18:56	#72
lucky.BOY Join Date: Mar 2010 Posts: 1,413 Czech Republic Location: Prague	Re: [Vehicle] KTO Rosomak Looking good, only thing I noticed is that top hatches have too few sides (unless they are meant to be octagonal ), but this being an apc you wont really be getting into it from up top, so it doesnt really matter. Though if you are not too hard pressed for LOD0 tris count, i think you could smooth them up for the odd guy who makes his way up the top, right? EDIT: pro tip, if you replace the "www" with a "dl" in a dropbox link, it will work like a direct URL that you can embed etc, bypassing the inconvenient dropbox stuff around it.

2013-08-14, 19:03	#73
ddeo Retired PR Developer Join Date: Apr 2012 Posts: 785 Poland	Re: [Vehicle] KTO Rosomak Thanks lucky, you're right about hatches I will fix it. If you will spot anything else let me know. Thanks again! edit: http://p3d.in/V02zI fixed hatches. UVW is updated too, but I'm not posting new link since it is only about more circulate hatches on UVW.

	Last edited by [R-DEV]ddeo; 2013-08-15 at 07:22..

2013-08-18, 17:02	#74
ivecorps Join Date: Aug 2013 Posts: 1 Yugoslavia	Re: [Vehicle] KTO Rosomak very good model
ivecorps Join Date: Aug 2013 Posts: 1 Yugoslavia

2014-10-11, 11:32	#75
ddeo Retired PR Developer Join Date: Apr 2012 Posts: 785 Poland	Re: [Vehicle] KTO Rosomak [WIP](PL) Reality: http://sc-cdn.scaleengine.net/i/da18...66ec01de99.png Project Reality: http://sc-cdn.scaleengine.net/i/73a6...bd2cb879b6.png Model is made by Kane from ArmaCoopCorps, I've slightly edited it. Anybody willing to texture it? edit: p3d view: http://p3d.in/vayoE uv: https://www.dropbox.com/s/l0fl72fi8g...erior.png?dl=0

	Last edited by [R-DEV]ddeo; 2014-10-13 at 12:35..

2016-05-03, 18:28	#76
CaptMiller Join Date: Apr 2016 Posts: 401 Russian Federation Location: Moscow	Re: [Vehicle] KTO Rosomak [WIP](PL) Very nice !